Plastic extrusion line As a new casing pipe for the protection of light and electric cable, HDPE silicon core pipes are characterized by corrosion-resistance, age resistor little friction coefficient of inner wall, good insulativity, and can be fixed very soon. It has been used in Europe for more than 10 years, and also has been initially used in China. It can be widely used for the protection of light cable of expressway, post and telecommunications and special network of military, so make the light and electric cable as pipeline. Integrated with three-layer co-extrusion, cooling and finalizing thedesign, drawing and winding, the production line is characterized by high automaticity, even plasticization, long life, easy operation and maintenance. So it is in chemical and construction firmis good graces. Model of Extruder SJ-90*32(outer layer) SJ-45*25(inner layer) SJ-30*25(indication bar) Diameter of Pipes 32/26mm 40/33mm 50/42mm Production Capacity 100-250(kg/h) Production Speed 3-12(m/ming) Drawing Power 1.5kw Drawing Speed 3-12(m/ming) Cooling Mode Vacuum -0.05_-0.07(MPa) Cooling Mode vacuum spraying water Winding Mode automatic Winding Length 2000-3000m Note: Without notice if above-mentioned technical specifications changed
