The KDS4 fully automatic PET high speed bottle blowing machine can convey with filling machine to avoid second time pollution. The process of making bottles for PET hig speed bottle blowing machine. 1)The preforms will be automatically transmitted to the place where they will be put in order automatically on the preform sideway. The heating-heads gain the preforms in succession at the entrance and the correspondence system will control the preforms to get the accurate temperature when they are heated by infrared ray. Meanwhile, the temperature in different level is showing clearly on the touch-screen. After the formation of the bottles, the machinery had will automatically take them out from the moulds, automatically check and link filling line. 2)Function and advantage A. Automatically put an arrange the preforms in good order. The whole process is stable and reliable. B. Infrared oven checks the temperature automatically after preforms are heated. To ensure the unanimous temperature, to avoid the defectivfe products. C. Automatically taking and putting the preforms, taking out and putting the bottles in good order. D. The checking system can examine the defective bottles carefully. F. Changing moulds quickly, highly automatic. G. The machine adopt famous brand computer, valve, cylinder, motor, gear and controller, the equipment function is stable and reliable with surface of touch type. H. Convenient maintenance, perfect for safe. Protection equipment of electronic machine. I, Can convey with filling machine in orer to avoide second time pollution.Part Unit KDS2 KDS4 KD6 KD808 KD810 KD812 KD814 Mould cavities Cavity 2 4 6 8 10 12 14 Working pressure bar 7-8 7-8 7-8 7-8 7-8 7-8 7-8 Air blowing pressure bar 30 30 30 30 30 30 30 Height of bottle mm 330 330 330 330 330 330 330 Stroke of opening mould mm 130 130 130 130 130 130 130 Thickness of mould mm 190 190 190 190 190 190 190 Heat unit group group 4 4 5 6 8 10 10 Heated-light layer layer 9 9 9 9 9 9 9 Max heat power Kw 20 35 40 50 60 80 80 Voltage V 220-380 220-380 220-380 220-380 220-380 220-380 220-380 Frequency Hz 50/60 50/60 50/60 50/60 50/60 50/60 50/60 Preform length mm ≤180 ≤180 ≤180 ≤180 ≤180 ≤180 ≤180 Bottle neck diameter mm 20-38 20-38 20-38 20-38 20-38 20-38 20-38 Bottle diameter range mm 20-115 20-115 20-115 20-115 20-115 20-115 20-115 Preform raw material Kg PET PET PET PET PET PET PET Volume range L 0.2-2 0.2-2 0.2-2 0.2-2 0.2-2 0.2-2 0.2-2 Capacity for mineral bottle Pcs/H 2400 5500 7500 9500 11500 13500 14500 Capacity for heat-resistant bottle Pcs/H 1600 3400 5200 7000 8800 10300 11800 Weight Kg ≤3800 ≤4800 ≤5800 ≤8000 13000-15000 15000-17000 17000-19000 Dimension of main machine mm 2300x1700x1800 2750x2160x1980 3100x2310x1980 3500x2500x1980 3500x2600x2600 3500x2600x3300 3600x2800x3300 Dimension of heater mm It is the section of the main machine and has beencontained in it 5600x1005x2600 5600x1005x2600 5600x1005x2600 Preform-tidied machine size mm 4000x5400x3500 4000x5400x3500 4000x5400x3500 Dimension of electrical box mm 2400x2100x700 2400x2100x700 2400x2100x700
