Semi-automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 50-2000ml. It is widely used to produce the carbonated bottle, mineral water pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. . Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the perform, the perform rotated and heated equally. . The air system has been divided into two parts: Pneumatic action part and bottle blow part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. . The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. . The machine can be operated in the step-by-step mode and the semi-auto mode. . The machine is small with low investment, easy and safe to operateName Item Unit Details Blowing machine Dimension mm 1600*600*1610mm Weight kg 500 Bottle volume (max) ml 2000 Bottle volume (min) ml 50 Bottle Neck Diameter (max) mm 40 Bottle Neck Diameter (min) mm 18 Body Diameter (max) mm 125 Body Height( max) mm 420 Number of Cavities mold 2 Production output pcs/h 1300-2000BPH Clamping force T 5.7 56KN Mold thickness mm 200 max Mold width mm 360x390 Space between Tie-bars mm 120-220 Diameter of Tie-bars mm 63 Scope of Tie-bars mm 405 Mold stroke mm 160 Stretching stroke (max) mm 420 Working pressure Mpa 0.8-1.0Mpa Blowing pressure Mpa 2.0-3.0Mpa Voltage/Power V/KW 220V/1KW Weight Kg 500 Pre-heater Dimension mm 1870*630*1450mm Weight kg 260 Voltage/Power V/KW 380V/14KW
