The application of Stone Hammer CrusherHammer crusher is mainly applied to grind low abrasion materials with medium hardness and compression strength not exceed 100Mpa. Such as coal, salt, chalk, gypsum, bricks & titles, limestone, etc. It is used widely in metallurgy, mining industry, chemistry industry, cement, construction material and ceramic industry etc. Why we choose this machine? Advantages High productive capacity High crushing ratio Low power consumption Uniformend product size Simple construction Compact and light Low operating cost Easy to management How does it work? Hammer crusher is mainly consists of frame, rotor, support iron and grate bars. 1. The frame is divided into two parts: Upper part and lower part, which are welded after being cut by steel plates. There is high manganese steels inside it, which is replaceable. 2. Rotor consists of the main shaft with several regularly grouped hammers, turn plate, pin shaft. Through the motor and triangle belts, the main unit drives the main shaft, and thereby drives the rotor. 3. Large materials entering the crusher through the feed inlet are firstly crushed by the high-speed hammers, and then the materials will be threw fiercely to the support iron, at this time, the materials will be crushed again. 4. The qualified materials will be screened out and exit from the gap of the Grate bars, then what about the unqualified? They will be left in the crushing cavity to be further hammered and ground until reach the standard size
