HST Series Automatic Die Cutting Machine USE AND CHARACTERISTICS 1. The machine is applicable to full-broken and or semi-broken continuous cutting operation of nonmetal rolled materials of same specifications and large batches with width smaller than 600mm by laser wood die cutter. 2. The machine is controlled by PLC, and operated by displayer (text displayer), and is provided with automatic feeding device, which is accurate to locate and saves raw materials. 3. Hydraulic die cutting device is adopted with four-column guiding, large pressure, accurate die cutting and stable operation. 4. Belt type conveying is adopted. The materials are input from one end of machine and after die cutting and mark pressing, output from the other end of machine. He workers need only to pick up the finished materials, which has greatly enhanced production efficiency. 5. The operation surface of cutting area is installed with photoelectric protection device, which can guarantee personal safety of operators. 6. The feeding part of the machine is allocated with tension control device, which makes materials maintain tension status during transportation and prevents materials from running off center. Products of special specifications can be customized.Model HST150 HST300 HST400 Maximum cutting force 150KN 300KN 400KN Maximum cutting width 400mm 500mm 600mm Cutting area 400*400mm 500*500mm 600*600mm Motor power 3KW 5.5KW 7.5KW G.W 2000kg 3000kg 3500kg
