Gas Assisted Injection Molding System Series - Gas Assisted Injection Molding System : GU-25, GU-25C and N2 Generator Gas Assisted Injection Molding (G.A.I.M) is regarded as the second revolution of injection molding. With this, product weight will be reduced by 50%, the producing cycle time will be cut down by 20%, spare parts of products will be reduced by 70%, the production cost will be cut 30% and the bowling ratio of product will be reduce by 30%. We use nitrogen to maintain the pressure inside to make sure there will no shrinkage occurring during molding. No more restrictions by traditional average thickness design nor by complicated slide mechanical design applicable to the molds design. With G.A.I.M., we could combine the thick wall and thin wall to form the products; with CAE software for the mold flow analysis to estimate the flow path of the material and nitrogen inside the molds before mold opening. A computer is used to analyze and design the best air channel positions and the gate position to shorten the products development cycle.The 3 Stages Of Gas Assisted Injection Molding:To inject the measure material inside the mold. Inject the nitrogen into the mold to flow through to ensure smoothness and reduction of weight. To maintain the pressure by the nitrogen, the nitrogen will re-penetrate into the material whilst the material shrinks to prevent bowing.Functions:The independent double loop design, 4 loops are available. 5 stages of air pressure & flow control system. Close circuit pressure control. Molding pressure display chart. 50 mold data reading & records function. The Chinese/ English touch panel comes with energy saving device. Gas Assisted Injection Molding System:G.A.I.M. can be connected with to all injection molding machine. The Gas Assisted Injection Molding Series is optional depending on customer's requirements. Relevant Instruments are:Gas Assisted Injection Molding System GU-25 with Gas Booster. Gas Assisted Injection Molding Controller GU-25C N2 Generator Gas Needle Gas Assisted Injection nozzle In addition to promoting G.A.I.M., we also offer services such as training, mold flow analysis, product construction design, in-house instructions, and also the plant exportation service. The following specifications are for your reference only and can not be used as the machine acceptance criteria. Please contact with our sales representatives to confirm the most appropriate machine features.
