2 rotary swaging lines, linked to one complete line. The lines are particularly suitable for shaft drives
Line 1, including workpiece magazin for max. 300 parts by a dia. 33mm, consists of:
1. Station: plunch swaging with machine type HE 40 VE, four-fold chuck construction, plunch or feed reducing with
rotary swaging spindle
2. Station: plunch swaging with machine type HE 40 VE, if necessary with an arbor
3. Station: Gear pressing with a horizontal Press type PE 500 with max. pressure of 50t, including chuck unit, tool
head an separate hydraulic unit
4. Station: turning unit, facing and chamfering the first side - inside and outside, slot plunching, chip output unit
4a Station: Flip station, turning the workpiece 180°
5. Station: plunch swaging with machine type HE 40 VE
6. Station: Gear pressing on the second side with a horizontal Press type PE 500 with max. pressure of 50t,
including chuck unit, tool head an separate hydraulic unit
7. Station: turning unit, facing and chamfering on the second side - inside and outside, slot plunch, chip output unit
8. Station: rolling-in the notches, successively in two areas
9. Station: idle station, to store the pieces intermediately, this station could be expanded to a additional machining
unit
9a station: air cleaning, blowing out the coolant of the parts
Line 2, including workpiece magazin for max. 180 parts by a dia. 42mm, consists of:
1. Station: feed-reducing diameter 36mm with arbor in a rotary swaging machine HE 60V, four-fold chuck
construction with a rotary swaging spindle. Able to produce flat
transition- angle up to 10°
2. Station: feed-reducing diameter 32mm with an arbor in a rotary swaging machine HE 60V, four-fold chuck
construction with a rotary swaging spindle. Able to produce flat
transition-angle up to 10°
2a. Station: Flip station, turning the workpiece 180°
3. Station: turning station, facing and outside chamfering, hydraulic chuck and chip output unit
4. Station: to store the pieces intermediately, this station could be expanded to a additional machining unit
5. Station: feed-reducing diameter 32mm at the second side, with arbor in a rotary swaging machine HE 60V,
four-fold chuck infeed construction with a rotary swaging spindle
control Siemens Simatic
workpiece length - max. 1000 mm
