Digital display Corner Crimping machine is designed and developed by adopting mature German classic structure in combination with our company's many years experience and accumulation. Batch jobs can be realized only through measuring angle size, thickness of material to adjust positioning plate to digital display bit, which solves some complicated problems, such as frequent adjusting and positioning before corner crimping, the waste of huge human resources, and knife test of sectional bar. Corner crimper is completed through rivet connection of bicorn tool with one hydraulic cylinder to position and one hydraulic cylinder-driven machine for synchronization control. The pressing is firm and correct. Especially the processing manner is the most widely used and the most reasonable in the world. Only by doing in this way can solve the problems of displacement of positioning centre and infirm splicing and excessive edge joint, the unevenness up to down caused by the desynchronizing of bicorn tool in its working thoroughly. It is one of our most recommended and widely used and appraised machines in corner crimping of aluminum alloy door and window in the market because of its high stability. TECHNICAL PARAMETER Model and parameter KS-M132 Double Corner Crimping Machine Power of oil pump motor 5Kw Rated pressure of oil pump 20MPa Maximum working travel 50mm Maximum size of frame 3500x3000mm Minimum size of frame 250x450mm Working Mode Pre-tight by servo detection, then hydraulic crimping Overall Dimension 3300x1850x1250 Machine Weight 900Kg Working air pressure 0.6-0.8MPa Working voltage 380VAC 50HZ Optional device spare tool
