JQ-2 Full Automatic Terminal Crimping Machine 1) Function: Wire measuring, both ends stripping, both ends crimping, programable blade depth, full and/or half stripping with programable strip length, both ends half strip, No. 1, 2 paralleldown, automatic crimp height adjustment, programable crimping position, strip pill back. 2) Wider wire range minimum AWG#36 3) Pull-back function 4) Larger servo press *1470N(150kgf)~3950N(400kgf) 5) Less air consumption 6) One-year warranty, full-life service 7) CE Approved Model: JQ-2 Dimension. mass: 810W× 1260D× 1380H(mm), Approx. 310KGS Capacity: both ends crimping 1.0sec/pc. (with minimum wire length, AS42 type)3600pc. h Wire size: 0.013~0.12mm2(UL1571 equivalent AWG #36-26)within O. D. 1.5mm Cutting length: 20~300mm(in case of AS42), 30~300mm(in case of AS40)option (600mm and 2000mm) Cutting accuracy: cutting length below 100mm: variation 0.5mm+(set length × 0.002) cutting length over 100mm: variation 1.0mm+(set length × 0.002) Stripping length: 0.7mm~6.0mm Cut depth: Max. adjustment 2mm 100step(1step=0.02mm)Pull back Press capacity: 3, 920N(equivalent to 400kgf)Servo press× 2sets(with Inching SW) Detector: Air pressure down, wire existence, wire overload, strip error(No touch type), crimp error, terminal presence, presence, terminal overload Power supply: AC200/220V(within± 10%) 50/60HZ single phase: 10A Compressed air: 0.5MPa (5kgf/cm2), approx. 70NL/min. (use clean dry air)
