Flexographic printing press - PLC Control - Inverter Motor Control - Pnetumatic System for Rubber/ Printing Roller Movement - Auto Tension Control 1. It adopts programmed control system and meter counter. One working length is setup on the control panel, after got to the setup data, the machine will automatically stop and alarm 2. It adopts famous brand frequency inverter to control AC motor with stable function. 3. It adopts pneumatic lifting system for printing cylinder. 4. Start in lower speed and full loading. WHen lifting or reducing speed, the tension is stale and low noise. 5. Anilox roller with the material has a full touch when in high speed. It has an advantage of high registration and stereo perception. 6. It adopts special oblique gear and printing size is in high precision. 7. The transmission roller is from Taiwan. It has balance treated and smooth run. 8. It adopts recycle air system which is made up of air blower, air sucker and thermal heater, and it adopts automatic temperature section control. And the cooler is available. 9. It adopts hot air blower and cold air blower for fast ink drying simultaneously. 10. Each printing unit has a clutch and seperate registration system with easy operation. 11. It adopts EPC for material edge tracking to achieve a good smooth rewinding. 12. It adopts double position unwinding/rewinding stand to realize non-stop exchange. Main Technical Parameters: Model Printing Width (mm) Printing Length (mm) Printing Speed (m/min) Plate Thickness (mm) Overall Dimensions (L*W*H) (mm) JT-6600 600 180-990 80 2.38 4800*1600*2400 JT-6800 800 4800*1800*2800 JT-61000 1000 4800*2000*2800
