Blissun's RFC-H series juice filling machines are designed especially for bottling synthetic juices (RTS) or HOT filled juices, tea (filled at up to 98 centigrade degrees), with optional capacity ranging from 1000BPH to 32000BPH, it adopts the pressure & rotative filling style. 1. Full filling is to avoid the bottle from sinking after the bottle cooling off, and to decrease the dissolved oxygen to the utmost extent. 2. Filling machine connected with UHT directly in order to reduce pollution. Filling machine is equipped with a CIP cleaning glass, filling valve can be effectively cleaned, Protection of internal and external wall filling valve clean and sterile. 3. Disinfection rinser, filler, capper, transition click-wheel and other non-rotating parts are isolated by fluid slot, the effective protection of bearings and other steel parts from disinfectant Corrosion, 4. The machine Equipped with 100-level air purification system and the isolation window and inlet and outlet of the bottle with air clean curtains, it can prevent dirty air into clean room. Sealing windows with lots of isolation gloves is convenient for maintaining. The facility equipped with external spray sterilization and room-cleaning fumigation system. 5. The machine adopts that air conveyor connected with thumbwheel directly instead of screw and conveyor chains, which is easy to bottle change, it's just replace star-wheel, inlet bottle screw and arc guide plate. 6. There is no need to adjust the height of equipments through neck holding tech for bottle transmission. And what is only to simply replace the bottle diameter related arc guide board, thumbwheel and nylon fittings etc. 7. Specially designed bottle clip is made of stainless steel and durable, non-contact bottle-screw part, to avoid secondary contamination, no process dead angle, which is easy to clean. 8. The whole machine is equipped with perfect overload protective device that can keep the equipment and operator safely in an emergency. 9. The machine adopts advanced programmable logic controller (PLC)to make the machine run automatically. 10. The main electric and pneumatic components are made with world famous brand such as: Siemens, MITSUBISH, ABB, etc. 11. The whole operation controlled with the advanced touch-screen, the controller can be easily operated 12. The machine is of low noise, which is parallel to that of same industry in the world. Welcome to contact us about our Juice Filling Machine in our factory.
