working principle of highpressure spray humidifier import industrial plunger pump transfers the grade3 purified water. which is pressed to 7mpa, to the spray nozzle though the highpressure cooer pipes. the highpessure water twists out from the specialized spray holes. after atomaization, the 315um drops are spray into the air and to lower the air temperature. at the same time, the spraying of the pressed water froms plenty of anion, making people feel comfortable. feature of high-pressure spray humidifier 1. good atomizing effect: the spray nozzle produces 5 bllion atomized particles, 315um diameter, short. esily gasifiable; so textile machinery won't be affected. the purpose of evenly spraying the humidified area can be reached by rationally composed spray nozzles. meet the needs of humidifying whole workshop; unlike the ordinary humidifiers. 2. low energy loss directly make use of water power, without supplementary equipment like air compressor. energy loss for atomizing 1kg water needs only 0. 005kw average with the 0-3kw hydraulic power automatic frequency converter. energy loss only 1% as much of traditional ionic pump, 10% as that of contrifugal and gas-water mixed pumps. the cost is greatly reduced. the composition of the high-pressure spray humidifiers 1. the composition of the converter power adopt import original high-pressure ceramic pump, 24hours constantly running. reliable steady and good durability, combine sanlin converter techniques. automatically adjust the rotational speed and steady piping pressure. make the humidifier run steadily and save energy. 2. living monitor according to the demands for different humidity in the area and process from the customers, perform living measure, display and control the humidifier in different areas with the humidness sensor and controller. reach one high-pressure system to deploy the humidness in different areas and save the equipment investment. the system put the water r-supply protection and automatically backwater into one system. the working processes are lively monitored by computer, without complex operation. 3. high-pressure transporter adopt brass pipes with pressure-proof 15mpa above, acid-proof, alkaline-proof, and good temperature resistance. keep high hydrostatic pressure in the pipes and do not easily from dirty. with high-altitude sling installation, flexible and easily, keep the equipment in the workshop running normally during the installation. 4. waterway disposer the system adheres large water tank. the in-out opens of the tank are equipped with large-size filters to stop the blocks in the spray nozzle. lower the temperature by adding ice in the tank. it is the best lowing temperature equipment in the cost in summer. 5. spray splasher choose different super ting and thin spray nozzles in different apertures and materials, according to the customers, a set of the system is equipped by number (20-320), such as stainless steel ti nozzle and ceramal super-hard nozzle.
