This Shot Blasting Machine is designed for the large, middle and small calibre size of the steel tube and the cylinder. These are designed to blast clean the interior of pipes and tubes removing millscale, rust, carbon and paint coatings. For pipes ranging from 13 mm to 2600 mm. The cleaning action leaves the surface free from dust, abrasives and contaminants ready for the application of the required paint coating system. Our range of pipe cleaning tools make cleaning of both new and existing pipe installations a one man operation with complete 360 degree coverage and thus doing away with need to rotate the pipe. We have developed a semi automatic hoisting system which enables the operator to pull the machine through the length of the pipe at the required speed to create the standard required in the cleaning and painting specification. Abrasives with the grain size of 1.00 mm up to 1.50 mm are ideally suited for the equipment. The use of aluminium-oxide and sand will cause excessive wear and are not recommended.
