Programmable Thermal Shock Test Chamber, used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, that is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm. Application objects, including metal, plastic, rubber, electronics. And other materials, it can be used as a basis to improve their products or reference. Specification: Internal Dimension: 40*36*35 cm Structure Three chambers design(the hot chamber, the cold chamber and the test chamber) Damper device Forced air drive damper Interior material SUS# 304 Stainless steel plate Exterior material Double sided galvanized steel Refrigeration Cascade refrigeration system Cooling method Air Cooling Ambient temperature 0° ~30° Preheating temperature 60.00~200.00 Precooling temperature 10.00~70.00 H. T. Shocking 60.00~150.00 L. T. Shocking 10.00~50.00 Temperature range -40~150 Temperature uniformity ± 2.00 Simulated load IC 5.0kg HT IN-Zone 40.00~. 85/5 min LT IN-Zone 85.00~40.00/5 min Preheating time 30MIN Precooling time 60MIN Senor T× 4 Controller OYO-8226 Setting range Temperature: 100.00~200.00/TIME: OHIM~999H/CYCLE: 0 ~9999 Resolution Temperature: 0.1 Output mode PID+SSR(control method) Power(K. W) 3, AC380V 50Hz 25K. W
