A. Machine：
NC series is the latest generation of Moving Bridge style high accuracy high speed Coordinate Measuring Machine from LEADER
NC serials combines single-point probing and analog scanning in a single high performance measuring machine also can equipped with contact and non-contact probe system. Based on the new generation of controller combines and optimizes temperature and accuracy compensation systems and advanced algorithms to support high-speed, high-accuracy analog open and closed loop scanning.
Design Characteristic
- Granite fixed worktable, all three axes are made of high performance granite, good temperature characteristic, have the same coefficient of thermal expansion.
- Granite worktable with integral “dovetail” guide in X axis, eliminate the pitch and yaw ,also provides superior motion stability.
- Z axis air-balance with self-protection ,improve motion capability.
- Advanced synchronous belt drive system with non-slip and high stiffness, ensures high stabilit, lower noise.
- High precise, rigid, and pre-loaded air bearings on all axes, can ensure the guidance never be damped
- Transmission system uses high-power DC servo motor and new double level tape reducer to ensure rapid and accurate axes movement..
- RENISHAW steel scale
- Famous parts from all over the world are used in every important sub systems
NC544Performance Specifications
Measuring Strokes : 500(mm) x 400(mm) x 400(mm)
Overall Dimension: 1530(mm) x 1180(mm) x 2300 (mm)
Max part weight : 500 kg
Resolution: 0.2(mm)
Accuracy according GB/T16857.2-1997 equal ISO 10 360：
(Volumetric length measuring error) E =2.5 +3.5L/1000 [mm]
(Volumetric Probing Error) R = 2.5mm
Environment Specifications
Room required specifications
-Average room temperature: 18 - 22 °C
-Maximum thermal gradients:1 °C/小h，2 °C/day，1 °C/m，
- Air supply system
- (Min. air pressure) : 0.7 MPa
- (Min. air consumption) : 0.1 m3/min
Electrical requirements
- (Voltage) : 220 Vac ± 10%
- (Frequency) : 50 Hz
- (Current) : 10 A
Allowed Maximum Floor Vibration
- (Frequency Range): 0 ~ 19 Hz 19~75 Hz > 75 Hz
- (Maximum Amplitude): 0.0011 mm 0.0011~0.002 mm 0.002 mm
