A. Machine:
NCL series is the latest generation of Moving Bridge style high accuracy high speed Coordinate Measuring Machine from LEADER,at the same time highly stable and easy to use.
NCL series combines single-point probing and analog scanning in a single high performance measuring machine also can equipped with contact scanning probe and non-contact high speed laser scanning probe system. Based on the new generation of controller combines and optimizes temperature and accuracy compensation systems and advanced algorithms to support high-speed, high-accuracy analog open and closed loop scanning.
NCL series CMMs suit to large work-part in products working shop and inspection center. Inspecting all kinds of work-part dimension and geometrical tolerance , to accomplish different tusks such as dimension inspection, shape measurement, reverse
engineering,, process and quality controlling.
Design Characteristic
-L shape structure reduce the weight of moving frame, high speed and stability obtained.
- Granite fixed worktable, all three axes are made of high performance granite, good temperature characteristic, have the same coefficient of thermal expansion.
- Granite worktable with high guide in X axis, eliminate the pitch and yaw ,also provides superior motion stability.
- Z axis air-balance with self-protection ,improve motion capability.
- Advanced synchronous belt drive system with non-slip and high stiffness, ensures high stabilit, lower noise.
- High precise, rigid, and pre-loaded air bearings on all axes, can ensure the guidance never be damped
- Transmission system uses high-power DC servo motor and new double level tape reducer to ensure rapid and accurate axes movement..
- High accuracy and long life RSF steel scale with 0.1mm resolution.
- Famous parts from all over the world are used in every important sub systems
-To allow automatic temperature compensation of machine and work piece.
NCL201010 Performance Specifications
Measuring Strokes : 2000 x 1000 x 1000(mm)
Overall Dimension : 3100 x 1800 x 3300 (mm)
Work envelop : 2200 x 1400 x 1200 (mm)
Max part weight : 3000 kg
Resolution : 0.1 (mm)
Moving speed : 400mm/s
Accuracy according GB/T16857.2-1997 equal ISO 10 360:
(Volumetric length measuring error)E =2.9+4L/1000 [mm]
(Volumetric Probing Error)R = 3.6mm
Environment Specifications
Room required specifications
-Average room temperature: 18 - 22 °C
-Maximum thermal gradients:1 °C/小时,2 °C/天,1 °C/米,
-Air supply system
- (Min. air pressure): 0.7 MPa
- (Min. air consumption) : 0.1 m3/min
Electrical requirements
- (Voltage): 220 Vac ± 10%
- (Frequency) : 50 Hz
- (Current): 10 A
Allowed Maximum Floor Vibration
- (Frequency Range): 0 ~ 19 Hz19~75 Hz> 75 Hz
- (Maximum Amplitude): 0.0011 mm0.0011~0.002 mm0.002 mm