Dry drawing machine/Straight line drawing machineThe series of dry wire drawing machine (DD) manufactured by BSMT is dancer controlled with a max. 20mm of wire inlet and a minimum 0.15mm of wire exit.Capstan angle and coating are optimized for different product such as steel wire, stainless steel wire, galvanized wire and other products. “Narrow Gap” water cooling principle with rust-resistant inner jacket is utilized. Rotating soapbox, soap stirrer, single or pressure dies, temperature detection, large soap container with pressure rollers, dust collection... can be the options.BSMT provides the competitive DD machines of low investment & maintenance cost, ergonomic and safety. CE certification can be applied if necessary. Easy access for maintenance purposes e.g. exchanging motor & capstan, recalibrating belt tension is integrated. No ground works required.Suitable for drawing 0.15 ~ 20 mm metal wire. Including medicine wire welding wire, gas shielded welding wire, aluminum wire, prestressed steel wire, steel wire rope, spring wire, stainless steel wire, cord, steel wire, double wire, and so on.Parameter LZE LZDLZCLZBLZADrawing passes <13 <13<13<13<13Wire inlet strength(N/mm2) ≤1350≤1350≤1300≤1300≤1100 Max wire diameter inlet(mm)246.51020 Min wire diameter exit (mm)0.150.30.512Max total wire reduction (%)9494949494 Max speed (m/min) 100012001200600600 Motor power(KW) 1.5-5.55.5-157.5-4530-5545-160 Type of take upSpool/stripper capstanSpool/stripper capstanSpool/SpiderSpool/SpiderSpool Control systemPLC, IPC, high speed I/O, network Noise lever(dB)Below 82homail chenyet@hotmail.comskype bsmt-chen
