Product Description GEARED DRILLING AND MILLING MACHINE STEELMASTER ZX-45 The JZX-45 milling machines is similar in overall size to the popular RF-31 but with the additional benefit of a 6-speed 95-1600rpm, gear driven head which can be tilted up to 90 degree either side of the vertical. This feature allows the head to be positioned in a variety of positions, allowing a whole range of milling, slotting, grooving, drilling and boring operations to be carried out. The usual handle-driven down feed is available for precision drilling and there is a fine manual down-feed control for precise vertical milling. The motor is controlled by a standard forward and reverse on/off switch. There is a heavy duty steel stand available as an extra, strongly recommended bearing in mind the weight of the machine. Also available is a optional power feed attachment which fits to the left hand end of the table and provides a smooth, variable speed longitudinal drive. Features Gear driven head 6 speeds Dovetailed vertical Z-axis Tilting head to ± 90 degree from vertical Large 730 x 210mm ground work table with T-slots Adjustable lead screw nuts eliminating backlash on both axis Fine feed hand wheel operating quill feed Forward and reverse on/off switch 3MT spindle with 75mm diameter quill Adjustable table and drill length stops Rack and pinion wind-up head Rear slide-way cover and slide clamps on all axis Spindle lock for quill Table lock on both axis Metric dial graduations @ 0.05mm for X & Y axis Includes Drill chuck 3MT arbor Tungsten-tipped cutter Safety cutter guard
