Product Description BELT DRILLING AND MILLING MACHINE STEELMASTER ZX32 This is a rugged and well made machine with good capacities and plenty of power, a good choice for a serious home engineer. The belt driven head provides a useful range of 12 speeds, 100-2080 rpm and is quiet in operation, the head can be re-positioned on the column with the aid of a handle driven rack and pinion drive. The table has three 'T' slots to allow the work to be directly mounting to table, or in a milling vice, with two large diameter control hand wheels with metric calibrations for the longitudinal axis. The fine down feed control can be locked firmly in position when milling and the mill also features an easy-to-read depth stop. Optional power feed provides smooth variable speed drive to longitudinal travel Features Quiet 'B' section belt drive system Extra large 820mm x 240mm ground work table with 'T'-slots Adjustable lead screw nuts eliminating backlash on both axis Fine feed handwheel operating quill feed Forward and reverse on/off switch MT3 spindle with 75mm diameter quill Adjustable table and drill length stops Rack and pinion wind-up head Rear slide-way cover and slide clamps on all axis Spindle lock for quill Table lock on both Axis Metric dial graduations @ 0.05mm for X & Y axis Optional power feed fits straight on the table 12 months warranty Includes Drill chuck 3MT arbor Tungsten-tipped cutter 3" tilting vice Toolbox Instruction booklet.MODEL ZX-32 DIGITAL READOUT Optional DRILLING CAPACITY 31.5mm END MILLING CAPACITY 22mm FACE MILLING CAPACITY 80mm SPINDLE TAPER 3MT SPINDLE SPEED 12(100-2150rpm) SPINDLE TRAVEL 130mm SPINDLE TO TABLE 460mm COLUMN DIAMETER 115mm SPINDLE TO COLUMN 202mm TABLE SIZE 820 x 240mm T-SLOT 14mm WORK TABLE CAPACITY 50kg LONGITUDINAL TRAVEL (X-AXIS) 540mm CROSS TRAVEL (Y-AXIS) 190mm VERTICAL TRAVEL (Z-AXIS) 410mm MOTOR POWER 1.5kW / 2hp MOTOR VOLTAGE 240V OVERALL HEIGHT 1100mm WEIGHT (NETT) 290kg
