year 1995?
This single station machine punches holes of various shapes and sizes up to 1.5" in 16 gauge mild steel. Adjustable side and back gauges allow precision gauging for exact duplication.
Standard Equipment
Stripper
Punch holder for punches with .5" diameter shank
Style "C" die holder with "B" adapter
Side and back gauges
Optional Equipment
Stand - Heavy duty construction featuring 3/16" steel inlcuding the work shelf. 33" tall, 28" wide and 15" deep.
A,B,C,D or E die holders and adapters
Model Model 2
Max. Punch Capacity 1.5 (38) dia. In 16 ga. (1.5) mild steel
Max. Punch Size 4 (101.6)
Tonnage 4 (3.6)
Throat Depth 12 (302.8)
Throat Height 3 (76)
Stroke of Ram .625 (15.9)
Dia. Hole in Ram 1 (25.4)
Machine Shipping Weight 350 lbs / 159 kg
Stand]Shipping Weight 95lbs / 43 kg
Space Requirements WxDxH Incl. Optional floor stand 16 x 32 x 75
406 x 813 x 1905)
Punch No. 2 – Made to a maximum of ½” round or a shape within the perimeter of ½”diameter
This tooling is designed for use in Di-Acro No. 1 and No. 2 single station punch presses.
Twin Shear – All punches requiring more than 4 tons to punch 16 ga. mild steel (13/16” round or equivalent irregular size) are ground with twin shear. Twin shear reduces necessary power about 50%. Punches 13/16” or larger are also available without twin shear.
Center Point – All single station punches from 1/8” and up are provided with a centering point. This feature is best suited for accurate layout work or for hole location. Additional charge to remove center point.
Clearance – Single station punches and dies are provided with a standard clearance of 007”- .008” (15% of 16 ga. material). Smaller clearance can be provided at an additional cost.
Blanking Dies – In operations where the slug must be retained, we can furnish the punch and die set to your specifications. For blanking the punch is ground flat.
Comments:
For More info go to : http://www.diacro.com/diacro_products/diacro_model2_punching_system.html
