Refuse Collector Z2

Refuse Collector Z2 1. Quality high-strength manganese steel used for all the main components of refuse container, bulldozer shovel and precompressor, firm in structure, light in weight, strong in rigidity, and high in strength 2. Nice and decent in appearance and form, with refuse container in rectangular frame in traverse section and in trapeziform frame in longitudinal section, and both sides as well as top surface in circular arc form, for the whole machine to appear nice and decent 3. Safe and reliable, with advanced hydraulic lifting circuit adopted; Even if the oil pipe is blown out, the precompressor won't fall down suddenly leading to gravel accident, which has enhance the safety in operation. 4. Strong in loading capacity, with two-way compression technology applied, and the compression rate able to reach more than 1: 2.5, and the density of domestic refuse after compression able to amount to 600~800Kg / m3 after compression 5. Good sealing property between refuse container and precompressor, with tailor-made rubber glue strips applied in between, which has prevented secondary pollution. 6. Advantage of electric control and hydraulic control taken with electric and hydraulic combined controls, through control changeover, to ensures the accuracy and reliability of actions of respective, thus to have improved the operational reliability and working efficiency 7. Automatic control of engine power output enabling automatic selection of conditions for acceleration and idle speed, which has helped minimize power waste and system heat generation, typical of low oil consumption and good economic efficiencyOutline Dimension (L*W*H) mm 6320× 2150× 2540 Chassis Model NKR77LLPACJAY (National III) Engine Power kW/r/min 96/3400 GVW kg 7300 Max. Running Speed km/h 100 Hopper capacity m3 6.6 Precompressor Capacity m3