The carbonated beverage filling Mono-bloc is used to bottle carbonated beverage such as Coca cola, Pepsi, Sprite, soda water and so on. This machine is integrated with washing, filling and capping in one machine. It takes bottle handling technology, which makes changing different size bottle more easily. It can do the bottles from size 200ml to 2000ml. And little spares are need when changing bottles. We suggest users to take same specification bottles, especially the same bottle neck. Our mono-bloc uses high quality stainless steel 304, which makes sure the quality of the products. The washing we take reversing bottle methods. It has so many washing heads which will spray the inside of the bottle after the bottle is reversed. After washing there will approximate 2 seconds dropping water. The filling technology is named "Counter pressure filling", it means when bottle enter into the filler, the filling tank will firstly inputting enough pressure to the bottle. Just after the pressure in tank is same as the bottle, filling begins. Capping we use magnetic capper. And capping power can be adjusted. We equip the machine with "No-bottle, No-Cap" system. If there is no bottle, the caps feeding will be stopped. The capper feeder is stand beside the mono-bloc, which is parallel to the machine. Above all our mono-bloc is high quality and is just the machine you are looking for!Model: DCGF 16-12-6 DCGF18-18-6 DCGF24-24-8 DCGF32-32-12 DCGF40-40-12 capacity (500ml based) 2500BPH 4500BPH 6000BPH 8000BPH 12000BPH Suitable bottle : Round bottle or square bottle PET bottle: (mm) (Bottle Diameter):φ50-.φ 110mm (Height):150 -340mm Suitable cap specification PE screw cap filling precision: ≤± 5mm filling pressure:(Mpa) ≤0.4Mpa Machine power 4.4 5.2 6.2 6.8 8 Machine size:(mm) 2250*1650*2250 2600*1965*2250 2980*2200*2250 3880*2200*2250 4000*2650*2500 weight: (kg) 2800 3500 4500 5500 6500
