Machine has 18" of stroke, 20" way width and 16,000 pounds thrust capacity.
Rigid welded steel column with hardened and ground steel ways and automatic way lubrication.
Welded steel base with open coolant and chip trough.
19" x 32" rectangular area 3-speed head with 16 - 1.50" diameter upper joint drives.
Upper joints are automatically lubricated and arranged with independent speed change
selection of 3 speeds or neutral.
Spare upper joint drives & ring gear.
Neck drive with two speeds and neutral.
Hydraulic control panel having both pressure and temperature compensation complete with
two adjustable rates of feed.
Automatic time delay reverse.
Manual jog with pushbutton operation for setup.
Standard coolant system with 65 gallon capacity reservoir in the machine base.
1/4 - 1800 RPM Motor drive coolant pump with 20 gpm capacity and automatic shut-off.
One manually indexed, front to back, in-line slide arranged for mounting of an optional rotating table.
Electrical controls and wiring for 460 volts, 3 phase, 60 hertz operating current, and
Allen-Bradley programmable controler and the following totally enclosed, fan cooled, ball
bearing, foot mounted motors: 15 HP, 1800 RPM Head drive motor, 5 HP, 1200 rpm Hydraulic
pump drive motor.
