INTRODUCTION
In order to meet the demand for processing splice plates which are widely used in structural steel fabrication and plate fabrication industry. FMC supplies PGD Series machine as an efficient and reasonable-cost choice for our valued customers.
PGD Series is CNC drilling system designed for processing pre-cut steel plates like, Splice plate, Flanges, etc.. There is an X-Y worktable with 4 working stations. The operator can load & unload plate simultaneously from both sides of the worktable. Computer based control system can read Tekla (*,dstv) drawings and Autocad (*.dxf) drawings directly without mass manually inputting.
There’re 12 / 16 hydraulic pinches to firmly catch the plate while drilling to ensure the working stability. High positioning accuracy with numerical controller ensures reliable precise operation.
Drilling of splice plates in pile ensures higher productivity. There are optional drilling spindles--H.S.S. Drilling Spindle and Carbide Drilling Spindle can be equipped with the machine. The machine equipped with High Speed Drilling Spindle can have a Max. rotation speed up to 1500 rpm. Also, user can change the hydraulic feeding spindle to be a servo motor controlled feeding spindle for drilling blind hole with required depth. An external mist cooling device is available for lubricating and cooling the drill bit.
Auto Chips-Removal device fixed on the machine provides easy chip disposal.
MACHINE MAIN CHARACTER
1.Productive and high efficiency
2.Machine has two open-type worktables, which are able to load/unload plate from any side when the other side is on working.
3.Simple and easy to operate. Machine can read drawings directly without manual input.