Liquid Silicone rubber for gypsum molds Liquid Silicone rubber for gypsum applications1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations . Liquid Silicone rubber for gypsum featuresLiquid Silicone rubber is two part silicone with general hardness of 22-50A°after curing with features ------(1) high tensile & tear strength (2) high duplication times(3) Low linear shrinkage (4) resistance to high-temperature (5)Low shrinkage and non-deformation(6)resistance to acid-alkali and expansionLiquid Silicone rubber for gypsum operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.Step Two: vacuum pumpingWithout exception, this step takes less than 10 minutes.Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.Step Three: Pouring the mixture into the frame with original gypsum mold slowly . Shelf life for Liquid Silicone rubber10~12months, when stored in a dry & cool place under the room temperature 25.Packing for Liquid Silicone rubber1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum For more information , pls feel free to contact Ms Omiga office no.:0086-755-89948294Mob:86- 18938867575Skype: omigagoEmail :hyjw(at)szrl(dot)net Welcome to our website www dot szrl dot net