CAS:9002-88-4HDPE-High Density PolyethyleneGrade: Blow molding grade, injection molding grade, etc.High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. It takes 1.75 kilograms of petroleum (in terms of energy and raw materials) to make one kilogram of HDPE.Application: Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating.Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min ≤1.0 Tensile yield strength MPa ≥19.0 Flexural modulus Mpa ≥965 Elongation@ break % ≥400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Package: 25KG pp bag or as buyer's request
