Maximum distance between the outer circumference of column sleeve and the center of the spindle: 54-1/2"
Minimum distance between the outer circumference of column sleeve and the center of the spindle: 10-3/4"
Maximum distance between the lateral side of the column and the center of the spindle: 52-5/8"
Minimum distance between the lateral side of the column and the center of the spindle: 9"
Maximum distance between the spindle end and the upper surface of the base: 56-3/4"
Minimum distance between the spindle end and the upper surface of the base: 15-1/4"
Stroke of spindle: 12"
Working surface of the base: 57" x 36"
Diameter of column sleeve: 13-5/8"
Bearing diameter/quil: 2-3/8" / 3-5/8"
Taper of the hole in the spindle: MT No. 5
No. of steps and speed range of spindle: 12 steps, 30 - 1,440 prm
No. of steps and feed range of spindle: 4 steps, 0.004 - 0.021 in/rev.
Spindle motor: 5 HP
Arm elevating motor: 1 HP
Clamping motor: 1/6 HP
Height of machine: 96"
Floor area required for base: 81-5/8" x 36"
Height of base: 8-1/2"
Distance between the column center and the left end of base: 15-1/2"
Distance between the column center and the right end of base: 62-1/4"
Distance between the column center and the arm tip: 68-3/4"
Weight: 7,700 lbs
Voltage: 220/440
