Product Description 1. Plastic & aluminium foil laminating board production line 2. Aluminium foil laminating PVC board production line 3. Aluminium-plastic composite plate production line This line is specially used to extrude the aluminium and plastic composite plate, this kind of plate is for the inner and outer wall decoration, the effective width of the finish product is from 1220mm to 1830mm, and the thickness is from 1mm to 18mm. This aluminium-plastic board / sheet production line adopt the special material & redesign the screw to enhance the plasticize rate, the T-style mould head adopt the double throttling, it ensure the board thickness adjusting would be more accurate, the precise control of the temperature would ensure the thickness and the surface flatness, the calendar has 3 rollers in horizontal, vertical and at 45 degree angle, it can adjust to up or down freely. The separate barrel temperature control system would control the temperature accurately, it would ensure the board thickness evenly. The cutter, receive coil device adopt the Cogging Torque motor, it can adjust the speed and tension randomly. If you want to produce the PVC foam pipe, you only need to change the mould head, it would become another PVC foam pipe production line, it would economize your investment found farthest. The mainly technical parameter as below Sheet width 600-1830mm Sheet thickness 0.3-18mm Max. Extrusion capacity 30-600kg/h Production speed 10m/min
