CCTV power supply-CP1209-5A-B (UPS)

DC 12V CCTV power supply Distribution box Model:CP1209-5A-B (UPS)Input voltage:AC 100-240VInput voltage Frequency: 50-60HzPower:ON/OFF SwitchOutput Voltage:DC12V +/-5%Total Output Current: 5ARipple & Noise:≤100mvEfficiency:≥85%Total Output: 9 ChannelFuse Type: PTC(Resettable)Fuse Rating: 1.1AUnit Size: 265x215x94 mmUnit Weight:2.1kgCarton Package:8pcs/ctn, 560 ×398 ×231 mmCertificate: CE, FCC, RoHSNote:Uninterrupted Power SupplyGeneral protection: Individual Fuse per output and LED indicator on each output.Short-Circuit protection: when short condition occurs,Individual Fuse will break the circuit and when it is removed, PTC fuse will automatically restore circuit.High voltage protection: when high voltage occurs, the surge protection will be hit through to protect the connected device.Over Current protection: when over current occurs, the power supply will automatically switch to self-protection status, when it is removed, then it will return to normal state.Batter backup: Use 12V Lead-Acid BatteryApplication : CCTV Camera, PTZ, IR Illuminator, Video Processor, Access Control , etc.The Advantages of a Good CCTV Power Supply1.The first reason why everyone should own a good CCTV power supply is that they will protect the CCTV camera equipments.Usually,electricity is constantly varies in strength,thought we don’t often notice it.occasionally flowing slowly and sometimes pulsing in too quickly.These fluctuations in flow can be damaging to electrical equipment, but with a higher quality CCTV camera power supply unit there is protection from this. The CCTV power supply will take the brunt of the changes in flow and regulate the amount of electricity being passed to the CCTV power supply distribution box, therefore meaning that it doesn’t get damaged. As a CCTV Camera System can cost thousands of dollars, there is no need to risk it all being damaged by not buying the correct protective equipment. 2.Another reason why a separate CCTV camera power supply unit is good is that it means that the system can be run separately from the main grid of a building.therefore meaning that should the building’s power go down, the CCTV Camera System will still be functional. Many criminals disable the electrics to a building before breaking in, as they hope that this will disable any cameras" with a CCTV power supply unit they will find that this is not the case! It also means that the cameras will still function during blackouts and other times when the electricity accidentally goes down. Alarm systems are often also attached to CCTV Surveillance, so it is important that these are maintained during times of no electricity" something that a CCTV power supply will enable to happen. 3.The final reason for having a CCTV power supply distribution box is that it means that all of the cameras can run from the same power supply unit, instead of all being connected separately. This obviously means that it is far more difficult for the power to a camera to be cut" either intentionally or accidentally" and that the CCTV Camera System therefore maintains its integrity. By keeping all of the power in one safe place, you ensure that you have a CCTV Surveillance that can withstand almost anything that is thrown at it. This will ensure your dome cameras, bullet cameras, and covert cameras are all properly powered. Last,As can be seen, a CCTV power supply distribution box should be at the top of everyone’s list when they are looking to purchase a new CCTV Camera System. They might not be the cheapest component of any CCTV Surveillance, but without them you leave the system open to a huge amount of problems and issues. So, get out there and find one as soon as possible,if not, you might regret it later!