New 45W Two Handed UV Lamp with a fan Descripton: For professional UV Gel Curing only. Automatic timers: 0secs-600secs Wavelength: 370nm. Voltage: 100V-120V 50-60 Hz 220V-240V 50-60 Hz Measurement: 39.5 x 17.5 x 30.5 cm/PC Weight: 2.435 kgs/PC Packing: 4 PCS/CTN; 70 x 40 x 32 cm (with Foam Packing) G. W.: 11 kgs/CTN Usage: Be sure the UV bulb and every part fix well before using it. 1. Power on, displayng "180" seconds on the timer panel 2. Set: A. Press "Set/Stop" button fist time. The indicator " Lamp" Turns red, and the UV Lamp gets ready to work. B. Press "Set/Stop" second time, the indicator "Fan" turns red, and the fan gets ready to work C. Press "Set/Stop" third time, the two indicators "Lamp" and "Fan" turns red, and the UV Lamp and fan are ready to work. 3. Timer: Set the time by "Timer+" to increase and "Timer-" to decrease, 5seconds for every time. The timer range is 0 sec - 600sec 4. Start: After setting the fuction you need, presses "Start" to work. 5. Stop: Please press the "Set/Stop" button to stop working if you need 6. Power off, if you don't use the machine 7. Using 5PCS 9W UV Bulbs, please replace the bulbs regularly for keeping the efficiency. Notice: 1. Don't stare at the UV bulb straightly. 2. In order to keep the efficiency, please operate according to the gel manual. Don't shorten or use over time.
