Product Description Cryotherapy Cool Sculpting Cryolipolysis Slimming Equipment Notes: 1. In case of first use of cryoprobe, the machine water tank must be filled with coolant. ( see on the picture above, when the coolant outflow from overflow outlet. It means the machine is already filled of coolant. ) 2. Add coolant to the machine on a regular basis (often supplement once a week). 3. First operation, The water pump inside is first stared, coolant may not be able to reach the handle. Pls try to anti-press star and stop button until the coolant can reach handle to play a circulating cooling effect. ( start and stop button interval of about 30 seconds). When use of cryoprobe, the left and right sides of the suction cup are severe fever and sustained high temperatures at about 50degree, indicating that the cooling system is not working properly and the coolant can not be transported to the handle. 4. The coolant in the water tank must be discharged during packaging and transporting of the equipment. Operations: 1. Smear gel or slimming products (normally 20-30g per time) onto the fat parts. Use the Cryoprobe head head to freeze the fat in fixed position. Set the operation time to be 20-30 minutes (set the freezing temperature to be around 5ºC). 2. Smear gel or slimming products (normally 20-30g per time) onto the fat parts. Use 40K fat-dissolving head to blast the fat in fixed position or apply it to the fat parts in a circular motion to blast fat. Set the operation time to be 20-30 minutes (the explosion intensity is recommended to be set to be the second level). 3. Smear gel or slimming products (normally 20-30g per time) onto the fat parts. Apply multipolar RF fat-burning head to the fat parts in a circular motion to blast fat. Set the operation time to be 20-30 minutes (the radio frequency intensity is recommended to be set to be the eighth level).