BS-K Air-inflation Flotation Cell is designed based on the Autoquenpu- Finland and Daoll-Oliver- America flotation cell. BS-K Structure Features: 1 The main shaft is side- hanged on the frame. The structure is compact and convenient for installation. 2 The impeller is in a Frustum shape and the stator is in a radial pattern, there is a strong agitation capability and low energy consuming. 3 Application of U-shaped tank cause little sand sedimentation. 4 The impeller diameter is small, so causing a low circle velocity and low energy consumption. The main features of Tigers BS-K flotation Cell: 1 With low power consumption, it can save 30-50% power than others. 2 The air can be spread efficiently, the bubble is scattering evenly, the foam is stable. 3 The solid ore particle can suspend completely, and not easy to sediment, the slurry and air can mix very well, get a high flotation result. 4 Wearing parts in a low abrasion, so cause a longer service life. Working principle of the Tigers BS-K flotation Cell: Tigers BS-K Flotation machine is applicable for the separation of nonferrous metals. The impeller is driven by V-belts, which can bring the centrifugal effect to form negative pressure. While extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it with chemicals to form mineralized froth. By adjusting the height of the flash board to control the liquid level, the useful forth can be scraped from the loam board. The height of the strobe must be adjusted carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should be kept at a distance and should be changed when worn. The bearing in the pump should be maintained every three months.
