JMDM--20DIOV2 serial port controls relay (transistor) board

1. IntroductionsJMDM-RS232 serial port controls relay (transistor) board is a high reliable industrial controller which independent research and development by Shenzhen jingmin digital machine Co., Ltd. Can be used to serial control the input and output of a variety of digit quantity / switch quantity signal. the Functions as follows:1. Collecting the switch quantity signal input state through the controller, real-time displaying to the PC monitoring interface through the serial port.2, Controlling the ON and OFF of the relay (or transistor) through the computer serial port, to achieve a variety of switch quantity control. Having extensive application values in various types of civil and industrial occasions, Win the customers' respected and loved for their excellent performance and cost-effective,2. the Using instructions3. Functional description1. JMDM-RS232 serial port controller used in the ON and OFF of the relay (or transistor).2. After the PC (the PC or host PC) connecting to this controller through the serial port, sending a string of ASCII code instructions to the controller can control some (or all) relay open or close, totally unnecessary to consider the hardware circuit of the relay selection, drivers, etc. such as, when serial port input O (002,1) NO.2 relay pull power; NO.12 relay loss of power disconnection when serial port input O (012,0).3. The serial port controller can also collect the state of the remote input point, for example, The controller sending out I (004,1) through serial port means the fourth input point have signal input, The serial port sending out O (012 , 0) means the eleventh the input point have no the signal input4. The distance between serial port controller and control host can extend through bus 485, the longest network reach 1000 meters;5. The single serial port control can independently control the ON and OFF of 12-channel relay (or transistor), can also collect 16 input point states. Through the address coding, under the circumstances of one second delay's permission, a serial port up to address and control 255 serial ports controller, constitute a large system composed of 4080 input points and 3060 output points.6. Supplying serial port communication protocol and VB communication source procedure, Presenting VB demo program of operating the controller through RS232 serial port or on behalf of the development of special procedures.4. Performance the parameters2. JMDM--20DIOV21) Working power: 12V or 24V, customized according to the customers requirement, AC and DC universal, the peripheral drive power using 24/12V DC;2) Master chip: high frequency the PC;3) Procedure storage space: 32K (use 64K if there are special requirement);4) Data storage space: 16K (use 32K if there are special requirement), saving data, the data will not lost after power failure;5) Input: 12-channel Opto-isolated digital NPN input type. Input current is 10 milliampere; two of them can use for interrupt source to count;6) Output:8-channel Opto-isolated digital output, 8-channel output type can customize according to the customers requirement, divided into 8-channel relay output and mixed output; 8-channel relay output: it is the normally open relay output forms; withstanding the maximum working current is 5A and the maximum voltage is 220V, the relay is divided into 12V and 24V, Determined according to customer needs; Mixing output: there are 4-channel relay outputs; 4-channel transistor outputs, open-collector output form, output voltage is 24/12V, the maximum output current is 4A, output status can be read back.7) The points of input and output can customize.8) System stability:Using Opto-isolated, enabled the internal watchdog and strict high frequency filter characteristics enabling the system working stable and reliable, the start-up time since crashed in less than one second.9) Interface: a standard RS232 serial communication interface (anti-15KV static and shock), can direct peripheral communication with computer and text display; can download procedure through RS232 interface directly, no need burner, convenient to the procedure modify and upgrade;10) Working status indicator: one LED light to display, there is a DIP switch which can set procedure status or procedure parameter according to the procedure demands;11) Shell with screws or rail mounting, integrated compact design.Shell size: L * W * H: 146mm * 90mm * 40mm;The Internal control panel size: L * W * H: 122mm * 86mm * 28mm;5, the Use1. Used for a variety of distributed control system;2. Used for a variety of remote monitoring system;3. Used for the bulb light control of the buildings, advertising and so on, Power plant control, automation workshop of large and medium-sized control project;4 Used for remote IO module;5 Available for the computer to the control a variety of peripheral equipment.