SAW CAPACITY ---------- 12-3/4" ROUND X 13-3/4" FLAT
BLADE SIZE ------------ 1" X 12' 10" X .035" THICK
BLADE DRIVE ----------- 3 HP, 220V/440V AC, 3 PHASE,
1800 RPM, BALL BEARING TFC
BLADE SPEED ----------- 65 - 350 SPM INFINITELY VARIABLE
SPEED DRIVE
CUTTING PRESSURE ------ ADJUSTABLE CUTTING PRESSURE 0-800 LBS
FEED RATE ------------- ADJUSTABLE 0 - 3 INCHES/SECOND
CLAMPING PRESSURE ----- ADJUSTABLE 0 - 1,700 LBS
EQUIPPED WITH
SAW: PIVOT STYLE/ HI SPEED/ HEAVY DUTY/ PRODUCTION BAND SAW
COOLANT SYSTEM: TOTALLY BUILT-IN COOLANT SYSTEM, WITH HIGH PRESSURE 4 GPM SEALED COOLANT PUMP, 1/60 HP, COOLANT IS DISPENSED THROUGH BOTH GUIDE ARMS ON EITHER SIDE OF THE CUT,AS WELL AS THROUGH A FLEX-TUBE NOZZLE TO FLOOD THE CENTER OF THE CUT
AIR REQUIREMENTS: 85 PSI, 4-6 CFM (DURING INDEXING), EQUIPPED WITH AIR FILTER AND LUBRICATOR
OPERATOR CONTROL: CONTROL CONSOLE IS LOCATED ON TOP OF SAW ARM FOR OPERATOR CONVENIENCE. SAW MAY BE OPERATED IN SEMI-AUTOMATIC MODE OR FULLY AUTOMATIC MODE.
BLADE GUIDE SYSTEM: SIDE AND BACK GUIDES ARE FLAT CARBIDE INSERTS
POWERED BRUSH: POWERED BRUSH DRIVEN BY AN ASSEMBLY MOUNTED ON THE DRIVE WHEEL REMOVES CHIPS FROM THE BLADE.
AUTOMATIC SHUT OFF: SAW WILL AUTOMATICALLY SHUT OFF IF THE BLADE BREAKS, OR WHEN THE AUTOMATIC FEED SYSTEM IS OUT OF STOCK, OR WHEN THE PREDETERMINED NUMBER OF PIECES HAVE BEEN CUT.
SAFETY GUARDS: MACHINE IS EQUIPPED WITH BLADE GUARDS AND AWARENESS BARRIERS FOR SAFETY PURPOSES.
INTERLOCKING VISES: PERMITS FEEDING OF MATERIAL FOR A MINIMUM DROP OF 3.5". REDUCES HORIZONTAL CAPACITY BY 1-1/2" - VISES CAN BE REMOVED TO OBTAIN FULL CAPACITY.
AUTOMATIC BARFEED: AUTOMATIC FLOATING (SELF ADJUSTING) SHUTTLE VISE FEED SYSTEM WITH ADDITIONAL ROLLERS, PREVENTS BINDING OF "CROOKED" AND DISTORTED MATERIAL. 6' LONG TABLE WITH LOAD CAPACITY OF 4,000 LBS.
ALL FUNCTION CONTROL (AFC): FOR MANUAL, SEMI-AUTOMATIC AND FULLY AUTOMATIC OPERATION AND MULTIPLE INDEXING FOR PARTS LONGER THAN 24" UP TO 240" MAXIMUM LENGTH. THIS CONTROL WILL BE MOUNTED ON TOP OF SAW ARM.
DISCHARGE TABLE: FOR EASIER MATERIAL HANDLING AFTER THE CUT. THE TABLE IS 24' IN LENGTH AND STANDARD AS SOLID. TABLE IS BOLTED ON TO MACHINE BASE AND IS FULLY COOLANT PANNED TO RETURN COOLANT TO THE MACHINE.