GWD200 Mine-use Temperature TransmitterFeatures Small size ,light weight,stainless steel anti-corrosionHigh accuracy, good stability,short response timeIntroductionGWD200 mine-use temperature transmitter is manufactured based on Q/3201 GHK 008 2010. Reasonable design,accurate detection,good stability,easy to install and maintain.Used in coal mine with coaldust and gas explosion hazardous locations,and be used with mechanical and electrical equipment of coal mine or coal mine monitoring system.High accuracy,strong anti-interference ability.THe structure adopts fully enclosed stainless steel,which can fit anti-moisture ,anti-corrosion and anti-dust and other bad enviroment requirement.Order Note1.The material of measuring medium should be compatible with the stainless steel.If it is corrosive,pls specify its material in detail.2.Please note in the order if you need zero pressure as negative pressure.3.Please note it in detail if your application environment is critical or the elments which may influence the pressure transmitter normal operation existed. 4.The structure and demension of the pressure transmitter can be used for most of the application occasions,if your application space is too small or having 5.other requirements to the transmitters,please specify it in detail.6.All specifications are subject to change.Contact Gaohua for specifications and engineering drawings that are critical to your application.Drawings contained 7.in this document are for reference only.
