SOLID STATE RELAY(SSR)`

.Overview of SSR1-1 Features(1)Complete solid state relayContact point is operatted by microelectranics rather than mechancal motions by eleclronic power relay of coil and ARC, chattering and bounce occured in general relay do not exist, On top of that , it obtains high reliability and long duration and does not create the noise from motion because of resin molding on its exterior. It has been recently able to be manufactured by assembly so that major parts are able to exchanged when necessary.(2) Photo isolationNoise on the load transmitted to the input part out of insulation between input and output by use of photo coupler at the cireuit for electric insulation of input and output in relating.(3)Motions with small signalSince input signal is operated by micro current and micro voltage because of photo couplerin comparison with general relay, it can be directly started by micro signal such as TTL-IC and other Linear IC etc.(4)Zero voltage, random voltage, switchingSince motion trigger of major microeletronics occurs around zero voltage of alternating current, it starts at about zero voltage though input signal occurs during cycle. It does not place a fatal impact on IC.MICOM and other electronic device because exising switching noise, excessive current and thrust current are extremely restricted. Circuit of random voltage type operates at high velocity immediately up on receipt of signal.(5)Protective cireuitConstant current regardless of voltage is contained at the input.(6) Small sized product and easy to handleHuge electric force opens and shuts with small-sized scale. With regard to the figure, three are types to which print plate is affixed and that of radiating plate.(7)High performance under the environmentIt is a humidity free since it is tightly sealed by use of incombustible resin as well as explosio free at the place of dangerous good so that it highly under the surroundings.