Main Features of EPS Automatic Block Cutting Machine(Standard, Vertical, Corrugated): 1. The main body of the machine is composed of welded thick-walled heterotypic square pipes, which can be freely and easily dismantled and assembled; 2. The EPSBC6000 has the Horizontal, Vertical and Edge surface cutting wires to achieve the three-dimensional (3D) cutting of the EPS Blocks, the Edge surface cutting wire is equipped with its own Cutting Machine, and can operate together with the horizontal and vertical cutting wires at the same time. This machine uses the Clutch to achieve a quick return of the cutting frame; 3. The machine has a specially made 10kVA Transformer with multiple sockets to which 50 electric heating cords can be connected to at the same time. This Transformer has a large capacity and the voltage can be regulated on a wide range of values; 4. The machine has Frequency-Speed Regulator to regulate the speed between 0-4m/min, to enable smooth operation, and to smoothly cut the EPS Blocks of stable dimensions; 5. The Edge surface cutting can optionally be equipped with automatic control system; 6. The EPSBC6000/V Lengthened Vertical Block Cutting Machine can cut all kinds of small-sized EPS Blocks in vertical direction at the same time. The error in the diagonal size of the cut product is less than 1.0mm. It is used in external walls insulation;
