Plastic product Extrusion Line 1. This line is composed of conical twin-screw extruder, vacuum calibration table, haul-off, cutter, foil machine, stacker, etc. 2. The extruder adopts transducer or the silicon-controlled rectifier direct current velocity modulation. 3. The temperature control meter is RKC Japan. The vacuum pump is Siemens and the speed reducer is Hanson. The maintenance of the line is simple and convenient. 4. This line can make all kinds of PVC doors, windows etc.MODEL YF180 YF240 Vacuum degree (MPa) -0.08--0.09 -0.08--0.09 Center height of T type dies (mm) 320 320 Height from ground to die (mm) 890-1100 890-1100 Moving distance of vacuum calibration table (mm) 400 500 Hauling speed (m/min) 0.3-7.8 0.1-4 Hauling force (KN) 7.5 30 Effective hauling length (mm) 1.0 1.8 Width of rubber (mm) 180 240 Cutting linear velocity (m/s) 58.6 58.6 Max. Cutting section (mm) 180×65 240×65
