Technical specification: 1.500mm pair twisting with back twisting 1-1. Inside back twist pay off A. Bobbin: 500*300*56 B. Application: Insulated cable C. Suitable diameter: 0.8_1.5 D. Cable tension without twisting: 0.6_2.4KG E. Max. Rotation speed: 1000 R. P. M. F. Max. Line speed: 125M/min G. Brake device: Motor+ electric brake 1-2. Drive: AC 5 HP *4P +inverter 2.500 mm pair twisting machine 2-1. Bobbin: 500mm*300*56 2-2. Max. Rotation speed: 2000RPM 2-3. Max. Line speed: 125M/min 2-4. Twisting pitch: 6-30mm (gear changing control) 2-5. Max. Traverse pitch: 5mm 2-6. Bobbin loading: Cylinder control 2-7. Bobbin lock: Auto lock + fast lock 2-8. Max. Loading weight: 150kg 2-9. Main motor: 5HP*4P+ inverter 2-10. Tension control: A. Given the tension value according to the weight B. Take-up weight: Setting the empty bobbin and full bobbin tension on screen C. The tension auto adjust + PID trace plate 2-11. Back twist and twist pitch control: A. Back twist rate setting: Max. 50% B. Screen back twist rate setting C. Screen setting the best rotation speed 3. Security device 3-1. The security door open or close not well, machine stop automatically 3-2. Loader not reach bottom, machine stop automatically 3-3. Counter not reset, machine stop automatically 3-4. Fault indicator not reset, machine stop automatically 3-5. Wire broken, machine stop automatically 3-6. Short Circuit, the voltage is less than or more than the right range, machine stop automatically 3-7. Each setting not well, machine stop automatically.
