K97- i galloping trimmer operation manual A. Main technical parameter: Blade diameter: 68mm Blade turning: Counter-clockwise The machine's head work angle range: 0-30 degree The worktable circumrotate angle range: ± 45 degree B. Direction for use: 1. The worktable should be placed stable, adjust the pedestal of machine to the best condition, then tighten the bolt, avoid shaking strictly. 2. The main shaft should be oiled by clean 10# machine oil, twice every shift, the oiling cap can be turned left and right to unlock the oil filler or cover the oiling hole, you should turn the oiling cap to cover the oil filler after filling to avoid the incursion of the sundries. 3. You can adjust the machine's head and worktable's angle properly at work to achieve the optimal work condition. 4. Open the Cutter Cover, then the blade stop turning automatically, so it is convenient to check the blade, and judge that is it necessary to grind the blade or not. 5. When grind the blade, control the two grinding wheel by hand, grind the both side knife-edge respectively, but can't force too fiercely, and look the result of the Blade-edge's grinding at the same time. 6. Clean machine timely to assure the expedite work. 7. If it is something wrong, invite the professional to adjust and maintain it.
