Working principle: Wet material delieved into bed face with open slot from the inlet is in a condition of throw or half-throw under the effect of exciting force,and flows to the outlet at a uniform speed.Hot air blasted out though open-slot at the bed face sufficiently contacts and exchanges with flowing layer of material.At the same time afterheat air and evaporating moisture are released from exhaust hole at the upper shell.The end product after drying is continuously taken out from outlet.Applied scope: This machine is applied to loose powder material with low wetness,wide range of particle size and particle material for granulation.Main meritsAs the material being dried can be fluidized very well due to concerted action of chemical vibration and hot air, it is especially applied to the material with critical fluidized-speed, wide range of particle size and the material which taken-out speed is difficult to define. heat exchange is Efficient because the hot wind cross the layer of material repertedly.it is especially applied to material withlow wetness, and can save energy 10% to 30% contrasted with drying equipment with single layer. As the conection structure like building block is applied to each drying disc, it is convenient to adjust the number of disc according to requirments so as to increase or decrease the area of drying.
