The set of equipment takes agricultural and forest waste, such as rice husk, wood chips, coconut fiber dust, saw dust and crop stalks etc as the raw biomass fuel. These biomass fuels will be gasified into rough gas in the Gasifying Furnace, which is our patented product. Then after a series of cleaning and cooling treatment, the purification of the gas will be pure enough to meet the requirement of gas needed by the internal combustion engine to generate electric power. Available biomass fuels:Agriculture and forest residues, such as rice husk, crop stalks coconut fiber dust, palm shell, pruned fruit tree branch, wood chips, chips from timber processing factory and so on.Biomass gas from Fengyu’s fluidized bed can not only be sent to internal combustion engine for electric power generation but can also be used for household fuel to cooking and heating. It also can be send to boiler or hot-blast furnace to produce steam or hot air for dryingINDEX:MODEL:LHC-200 LHC-1200Generator rated output power:100-300KWProduction volume of biomass gas 2250Nm/3hrGas temperature of the outlet after cleaning and cooling:under 45 degree celsiusConsumption of biomass fuel:0.9-1.8ton/hr(for rice husk)Weight:2.0-3.8tonMain component and caloricity of biomass gas are different for difference of characteristic of biomass fuel gasification method, the caoricity of biomass of gasification is normally 1100-1500kcal/Nm3.(4.6-6.3MJ/Nm3)Biomass gas component:CO:17.2%H2:4.05%CH4:6.82%CmHn:1.24%H2S:----CO2:15.1%O2:0.8%N2:54.7%
