Roll lathe HERKULES, WDK 850 L, (1600x10000)
Tornio HERKULES, WDK 850 L, (1600X10000)
Manufacturer: Herkules, Germany
Yop: 1968
Max turning lathe,mm: 1600
Distance between points, mm: 10000
Min working diameter, mm: 400
Body width four slides: two for carriages and two for the holder
and the tail stock
Total lenght of the body, m: 15
The body is installed on a foundation with pits fot the evacuation of chips
Carriages: two carriages driven by a rack and pinion
with adjustable travel speed from the operator control panel,
tool holder for 80 mm square section tool
Turning the grooves on the rolls can be performed by coping from a model.
The gear box is equipped with automatic gear change and with the possibility
of the continuous change of the rotations speed inside each gear from the operator panel
Rotation range is 0.9 to 45 rot/min. The headstock plated has four independent adjustable chocks.
The tailstock has a platen with four chocks and has a hydraulic driven of the rotating point.
The main motor: SIEMENS 115 KW/ 600-1500 rot/min in a DC current.
Total installed power: 200 KW
DC driving are supplied through a Ward –Leonard system.
The maximum weight of the turned part was 50 ton..
Overall dimensions 17000 mm x 5000mm
Accessories: milling head, second carriage with holder
Documentation in German language
Condition; in operation, little used , the slides has no damages
