Brief Introduction
HPL 2500W high power laser cutting system is the third generation laser cutting machine, which integrates the advanced driven system, laser cutting technology, and the most advanced laser. Special high stability Cantilever Arm, non-contact HIS, integrated abstraction detecting, remote control and selectivity load and unload function. The complete machine with relatively minimum maintenance requirements is advanced, high reliability and multi-functions. It provides our customers a significant competitive advantage and high return with processing more sheets at a higher quality.
Main Features
• Completely flying optics.
• Cantilever moving arm: rigidity, good vibration resistance, open area construction which is easy to operate
• Ball bearing driving: high precision, high dynamic performance and good stability
• Four axis: including X, Y, Z and W axis (rotating axis) for machining shaped parts and cutting as well as welding for tubular pieces
• Auto Transfer working table: 30%-50% production efficiency increased
• Movable/pendant controller: a remote controller with a drawer for tool and lens. It’s convenient for the operator to start and run the machine at any location.
• Working area lighting: the light located right beneath the cantilever.
• Safety facility: open-type light curtain for safety
• Special designed high performance fume extraction system to ensure no pollution to the processing environment.
• The worldwide advanced laser with high beam quality, low operating cost and high efficiency.
• Circle water cooling system: ensure safety runnig and beam transfer.
Other Features
• Non-contact height detection: it can avoid the hurt on metal material service.
• Hugh Pressure Cutting System:it’s useful for cutting stainless steel and other material
Technology Specification
Processing Scale:1500mm × 3000mm
Max. Speed:50m/min
Positioning Accuracy:0.05mm
Repeatability:0.02mm
Min. Resolution:0.001mm
Laser Output Power :2500W
Benefits of cantilever design
The Cantilever design is more flexible and user friendly than the traditional gantry system. The Cantilever design provides the following benefits:
• Easier access to the head
• Faster set up
• Smaller footprint
• Ability to load oversized plates
• Easy unloading or part picking while the machines is working
• Lower moving mass
Choice of load/unload systems
The Profile Plus is supplied with either a high speed transfer table which is loaded and unloaded at the rear of the machine, or a manual chute table that can be moved in and out of position or simply loaded in place. Both tables have easy clean facilities and both come ready with fume extraction duct built-in.