Product Description 1. Steel cord stripped machine is used to prepared to strip the steel cord before connecting steel cord ends of conveyor belt by vulcanization; 2. Labor-saving, High efficiency, Convenient to remove and stall Light in weight, applicable to protect the environment and so on; 3. Advanced techonoligy department, skilled workers, passive staff, motivative regulator and so on; 4. To peel off about 15cm --20cm width steel cord at the end from the wire rope conveyer belt, Remove off rubber from the both sides, and then fixed the adhesive tape. 5. To install the up and down blades, and put the down blade right on the wire rope center, and adjust the pressure of the bolt, and then press the handles, and connect the wire rope with drag machine to work, and bring along the blade to make the rubber layer disengage from the rope, and the end of stripping. Welcome all over the world client to come to investigate our company, factory, workshop and so on.Name steel cord stripped machine Motor powder 15kw voltage 380v 50Hz Add to Basket
