Horizontal and Vertical Burning Tester

Horizontal and Vertical Burning Tester:Key Specifications/Special Features:Features: Main reference of horizontal and vertical burning test are UL 94-2006, IEC 60695-11-4, IEC 60695-11-3, GB/T5169-2008 series of standardsIt uses Bunsen burner with specified size and gas source (methane/propane)According to certain flame height and angle to burning horizontal/vertical combustion test facilities several times to assess flammability and fire risk with fire, burning duration and length of burningHorizontal and vertical burning tester is mainly for flammability l V-0, V-1, V-2, HB, 5V with grade material and for grading assessmentSpecifications: Burner: Diameter: 9.5, ±0.3mmSingle gas and diameter: 9.5, ±0.3mm (single and mixed gas of Bunsen burner)Test point: 0, 20 and 45° manual switchFlame height: from 20, ±2mm to 180, ±10mm adjustableBurning time: 0 to 999.9s, ±0.1s adjustableAfter flame time: 0 to 999.9s, ±0.1s, automatically record, manual pauseAfter burning time: 0 to 999.9s, ±0.1s, automatically record, manual pauseCombustion gases: 98% of methane or propane gas (general LPG can be used to replace)Flow pressure: meter and pressure gauge (gas and air)Temperature test range: 0 to 1,000°CFlame temperature requirements: from 100, ±5°C up to 700, ±3°C within 44, ±2s and 54, ±2sTheromocouple (D): 0.5mm 2 import armor (type K) dual temperature system (50W) and 5VA/B (500W) gradeTest background: blackTest process: automatic control independent ventilationReferences: UL 94-2006, IEC 60695-11-3, IEC 60695-11-4, GB/T5169.15, 16, 17, 22-200815Studio size: 0.75m3, advanced fire board chassis (can be customized)Dimensions (W x D x H): 1,100 x 700 x 1,300mm