I Characteristics: This FL250-B type welding machine is of full automatic, PLC control, specially for welding fence mesh.used in rail, express, bridge and buildings, etc. It is also suitable for producing warehouse meshes. The space between longitude is adjustable before welding; The space between each woof can be pre-set in the PLC (different spaces can be preset). II Buildup of the line: longitude wire feeding device, woof wire feeding device, welding device, stepping motor hauling device, PLC control system, simple unloading rack, straightening & cutting machine (two sets), manual welding machine (one set, for remedying), spare parts III Main technical data 3.1 Wire diameter: from 2.5mm to 6mm, carbon wire, galvanized wire 3.2 Welding aperture: from 25x25mm to 200x200mm 3.3 Width of finished mesh: 2500mm 3.4 Max. length of finished mesh: 5000mm (can be specially ordered) 3.5 Number of welding spots: 48 3.6 Welding speed: 30 times/min 3.7 Driving motor power: 4.0kW 3.8 Rated voltage: 380V, 3phase, 50Hz 3.9 Welding power: 480kVA 3.10 Control system: PLC control, PLC & inverter imported from Japan. 3.11 Dimension of the machine: 8480mm x 3160mm x 1700mm (can be loaded in one 20 container) 3.12 Weight: about 4.2T 3.13 Transformer capacity needed: more than 120kVA (laying position of this transformer should be within 50 m away from the machine).
