YAG Pulsed Lamp power supplyMain feature: 1. Single chip computer and analogous circuit realizes easy and reliable control function. 2. Adopts constant current and voltage regulation (applied on new system) technology ensure this power supply has stable output and high control accuracy. 3. Adopting high frequency IGBT module lets this power supply has large margin. 4. Multiple protections avoid fault broadening. 5. Intelligent fault detection simplifies fault elimination. 6. Preset output parameters can be operated(applied on new system) on managemant system. It reduce complex operation. 7. Preset parameters of power supply can be stored and executed in file form. It greatly reform welding effect. 8. Energy feedback control makes welding more stable and consistent (applied on new system). 9. Modular design optimizes production and maintenance. Specification: 1. Input voltage: AC380± 5% 50/60Hz. 2. Control current 100A-600A. 3. Pulse width: 0.2ms-10ms. 4. Laser frequency: 0.1Hz-100Hz 0Hz, Jogging control, 1 Hz/step 5. Output power: ≤ 6KW(single lamp), ≤ 12KW(double lamps. 6. Parameter setting: Max 100 waveform parameter can be set, each waveform is composed by Max 15 sections. 7. Environment: Operating temperature: -5--40degree Celsius, Relative humidity: (Without dew)< 80%, Dust: Less than 0.01G/M3. 8. Dimension: Integrative type Split type Single lamp: L× W× H=482× 525× 267(mm)(Single enclosure) Double lamps: L× W× H=482× 525× 267(mm) (Unit 1) L× W× H=482× 525× 200(mm) (Unit 2)