1. Japan made P4 precision spindle ball bearings are adopted for easy maintenance. 2. Longitudinal and cross turcite-coated guide ways guarantee flexible operation. 3. Longitudinal travel of the working table use hydraulic or manual driving, one guide way is "V", the other one is flat way. 4. Cross travel use electromotion or manual motion driving, the guide way is "V". 5. Logical controller that use propramme controller combined with transducer to realize the machine auto feed, stepless and lubricate system offer oil periodicity. 6. Auto feed realizing export contactless can be fit to feed and change direction frequently, when manufacturing smallwe workpiece with high dependility. 7. Magnetizing and demagnetization controller relizing export contactless can be fit to magnetizing and diamagnetic frequently, the time of demagnetization is short, avoid pulling and transfiguration of the elemagnetism chuck workpiece.Model TH-M3270 Working table size (LxW) 700x 320mm Max. longitudinal travel of the working table 800mm Max. cross travel of the working table 370mm Max. distance from spindle axis to table surface 600mm Max. load including electromagnetism chuck 300kgs Working table T slot 18x 1mm x N Working table speed 2 ~25m /min Cross auto feed 0.04~10mm Cross rapid moving speed 1000mm /min Cross feed on hand wheel 1 gra. 0.02mm 1 re. 4mm Spindle rapid vertical feed 1500mm /min Spindle speed 1 gra. 0.005mm 1 rev. 2mm Wheel rotate speed 1 gra. 1450r/min Wheel size 350x30x 127mm Spindle motor 4kw Working table hydraulic motor 3kw Hydraulic auto motor AC 40V 5A Vertical feed motor 250w Coolant motor 40w Flatness of the workpiece 0.005mm Surface roughness of the workpiece Ra0.63 Overall dimensions (LxWxH) 2160X1900X 1970mm Packing dimensions (LxWxH) 2300X1950X 2210mm N.W./G.W. 2600/2900kgs