Owing to long-term usage of engine,the binding face of cylinder body&cylinder lid has generated deformation under the impact load and high temperature condition,which causes the poor precision of the binding face as well as the unreliable sealing performance,so it is required to adjust when overhauling. The machine tool is mainly used to regrind the binding face of engine cylinder body and cylinder lid via the processing of grinding or milling to ensure that the precision of the binding face reground meets the specified requirements.Model Unit 3M9750 Worktable size mm 1500×500 Processing maximum length mm 1500 Processing maximum width mm 500 Processing maximum height mm 800 Maximum bearing weight of worktable kg 600 Grinding segment tray diameter mm 500 Vertical movement travel of grinding segment tray (manual operation) mm 15 Hydraulic worktable travel speed scope mm/min 40~900 Main shaft motor speed (frequency converter speed regulating) r/min 150~1000 Main shaft motor power KW 7.5 Hydraulic oil pump motor power KW 1.5 Wheelhead rapid fluctuating power of motor KW 0.75 Cooling motor power KW 0.09 Net weight of machine tool kg 6000 Gross weight of machine tool kg 7000 Size of packing box mm 5650×1760×2650